2 MW hot-water boiler house, turnkey

COMPLETE HOT-WATER BOILER PLANT

1.1 Hot-water boiler

An automatic hot-water boiler for gaseous and liquid fuels. Three-pass design, with a furnace whose cooled reversing chamber is enclosed in a water-cooled membrane wall, an internal injector to raise the return-water temperature, and two passes of fire tubes arranged in a ring.

The flame tube forms the combustion chamber with the burner built into the front cover of the boiler at the inlet. Manholes and inspection openings for internal inspection of the boiler are provided in the shell.

Table 1. Main technical data of the boiler

1.2 Main boiler equipment

1.3 Monoblock burner

Burners are used across a wide range of industrial and process applications, from energy, heating and waste incineration to chemical, refining and other processes. Automatic monoblock burners with their own fan provide complete combustion of gaseous and liquid fuels for steam, hot-water and hot-water boilers, furnaces, dryers, heaters and steam generators.

SCOPE OF SUPPLY:

The standard delivery of a monoblock burner includes the burner with an integrated fan, an automatic control system, safety devices and gas fittings, including a gas filter, two shut-off valves and a control damper. In addition to the standard delivery, we offer modifications or extensions of the configuration with other accessories and complete equipment.

A burner with electronic fuel-air ratio control. The air-fan motor speed is regulated by a frequency converter.

Main technical data:

Scope of supply:

• Automatic monoblock gas burner
• Equipment:

1 pc. natural-gas filter

2 pcs. solenoid valve

2 pcs. gas pressure switch (MIN/MAX)

1.4 Boiler control system

A basic boiler control unit that regulates the burner output according to the set outlet temperature. It controls the boiler pump, monitors the return-water temperature to the boiler and detects boiler and burner faults.

The control cabinet is mounted on the boiler. The delivery includes cable connection to the measuring instruments on the boiler. The control cabinet is fitted as standard with a 7-inch touch panel.

2. BOILER-HOUSE EQUIPMENT

2.1 Master control system

The control cabinet of the boiler-house master control system, intended to manage the operation of the boiler.

Monitoring of alarm conditions in the boiler house, namely monitoring of CH₄ and CO gas leaks with electronic locking of the emergency shut-off valve on the gas inlet to the boiler house, monitoring of flooding and overheating of the boiler house, ventilation, speed control of the main circulation pumps and pressure control in the hot-water supply system to compensate for water losses in the system. The control panel is fitted as standard with a 7-inch touchscreen for convenient operation.

2.2 Booster unit with vertical pumps

Automatic pressure-boosting pump stations are intended to increase pressure when replenishing water in the hot-water supply system.

2.3 Air separators, boiler-house outlet DN80 PN10

For complete air removal from heating systems. Air separators increase comfort and improve efficiency. Removing air from the system water extends the service life of pumps, control devices and other system components.

• Flanged connection per EN 1092-1 PN16
• Extremely low hydraulic resistance, reducing energy consumption
• Stable performance throughout the service life
• Low maintenance costs

2.4 Dirt separators, boiler-house inlet DN80 PN16, DN65 PN16

For use in closed heating systems. Dirt separators protect boilers, pumps and fittings from damage caused by the settling of dirt particles. They prevent dirt particles from settling in the boiler. Removing dirt particles from the system water extends the service life of pumps, control devices and other system components.

• Flanged connection per EN 1092-1 PN16
• Extremely low hydraulic resistance, reducing energy consumption
• Twenty-five ultra-strong neodymium magnets are built into the separator design
• Stable performance throughout the service life
• Low maintenance costs

2.5 Chemical water-treatment unit, 2 m³/h

Water softeners with two vessels and brine tanks. Both vessels have separate control valves, allowing them to operate at up to double the nominal capacity. The two control valves are connected by a communication cable. They monitor each other's operating status. Only one valve can regenerate at a time, which ensures a continuous supply of softened water.

The parallel duplex water softener can be expanded at any time in the future by connecting three or more vessels via the communication cable. This allows the system capacity to be further increased.

Accessories:

• Mechanical pre-filter
• Safety valve
• Vacuum valve
• Chemicals for initial filling – 50 l
• Dosing pump

2.6 Prefabricated piping elements

• Hot-water outlet pipework
• Hot-water inlet pipework
• Natural-gas pipework
• Pipe insulation — sleeve insulation of rock wool with an aluminium-foil surface coating
• Expansion-tank safety valves
• Connecting pipework to the expansion tank
• Flue-gas outlet beyond the boiler house, approx. 5 m + 1 bend

2.7 Boiler-house enclosure, approx. 6 × 13 m

The building is designed with a gable roof supported on a frame structure with solid walls. The roof structure uses the lightweight METSEC truss system. The roofing is made of PUR sandwich panels providing sufficient thermal resistance for the building's energy efficiency. The walls are clad with PIR panels mounted vertically, giving the structure a more aesthetic appearance without the need for metal trims to cover the panel joints.

Access to the room is provided by fire doors in a more distinct colour. Natural lighting is provided by several sets of windows located in the upper half of the wall, ensuring even illumination of the whole hall as well as sufficient provision for expansion relief. The expansion-relief windows are designed in accordance with applicable standards. The hall is equipped with electrically driven sectional gates with integrated pass doors. One external wall is designed to be solid, without windows or doors.

2.8 Ventilation

The boiler-house building will be fitted with ventilation louvres to provide natural air exchange inside the boiler house.

To remove heat from the boiler house, fans will be installed that switch on as soon as the temperature in the boiler house reaches the set threshold.

2.10 Three-phase industrial automatic AC voltage stabiliser, 50 kVA

The proposed industrial AC voltage stabiliser is air-cooled, three-phase and four-wire. This series of automatic compensated voltage stabilisers is specially designed for more demanding industrial applications requiring a more reliable and practically maintenance-free solution.

Voltage-stabiliser characteristics:

Input: three-phase four-wire system

Output: three-phase 380 V

High efficiency: over 95%

Full protection: protection against over/under-voltage, overheating/overload, short circuit

Smooth automatic voltage regulation

Compliance with international standards

The three-phase industrial automatic AC voltage stabiliser is designed using the latest technologies to maintain a stable output voltage in the event of fluctuations in the external power network and load changes that cause voltage fluctuations.

Options

3.1 Gas generator in a soundproof enclosure

A gas generator in a soundproof enclosure (three-phase 400/230 V 50 Hz), chassis / enclosure F1, with an automatic control panel, engine-driven.

Chassis / enclosure: A soundproof canopy with top air discharge. Crane lifting is by the top lifting eye in the centre or by the metal plates on the sides depending on the model, or by forklift from below. Wide doors and convenient access to all components for maintenance. Doors with stainless-steel hinges and a keyed lock. The canopy is painted with epoxy powder paint, oven-cured, for high corrosion resistance. High-density mineral wool 50 mm thick is used for noise reduction. A residential-grade exhaust silencer is installed inside the canopy.

Standard reference ambient conditions per ISO 8528-1:2005: 1000 mbar, 25 ºC, 30% relative humidity.

Prime Power (PRP): In accordance with ISO 8528-1:2005, prime power is the maximum power that the generator set can continuously deliver while supplying a variable electrical load for an unlimited number of hours per year under agreed operating conditions, provided the maintenance intervals and procedures specified by the manufacturer are followed. The permissible average output power (Ppp) over 24 hours of operation must not exceed 70% of PRP.

Emergency Standby Power (ESP): In accordance with ISO 8528-1:2005, standby emergency power is the maximum power available during a variable electrical load sequence under stated operating conditions, which the generator set can deliver in the event of a mains-power failure or during testing, for up to 200 hours of operation per year, provided the maintenance intervals and procedures specified by the manufacturer are followed. The permissible average output power over 24 hours of operation must not exceed 70% of ESP.

Notes:

The scope of supply includes a cooling-jacket heater with a circulation pump and a battery charger.

3.2 Uninterruptible power supply (UPS) 50 kW

The UPS is a high-efficiency, modular, three-phase uninterruptible power supply that delivers high performance for edge, small and medium data centres, as well as for critical infrastructure in commercial and industrial facilities. Its compact design, high-density technology, N+1 redundancy and fault-tolerant architecture maximise availability, operational efficiency and protection of critical loads while minimising the total cost of ownership. Thanks to patented technologies, this UPS provides up to 97% efficiency in normal operating mode and up to 99% in ECOnversion mode, equivalent to 66% greater energy savings. Intelligent modular batteries integrated into the UPS cabinet optimise the footprint and provide highly predictable autonomy time for critical loads.

Not included in supply

• On-site installation
• Chimney
• Other additional equipment
• Connection to heat, water and gas distribution networks
• Extension of the hot-water supply system (heat network outside the boiler house)
• Operation approvals with local authorities
• Commissioning works
• Anything not expressly stated in the specification

Warranty

24 months from commissioning, provided that commissioning and equipment setup are carried out by an authorised service team, but no longer than 30 months from the date of sale.

The exact configuration is defined during the design stage after order confirmation.